四头焊机-欧洲杯在线买球平台

四头焊机

四头内环缝二氧化碳气体保护自动焊机是汽车车轮轮辐与轮辋合成焊接的专用设备。它具有节能、效率高、变形小、焊接强度高、四段焊缝一次成型等一系列优点。

the 4 torch combined welder machine is an inner ring carbon dioxide gas protection automatic welding machine, it can weld wheel disc and rim automatically. it has a series of advantages such as energy saving, high efficiency, small deformation, high welding strength.

详细描述

四头焊机-欧洲杯在线买球平台
四头内环缝二氧化碳气体保护自动焊机是汽车车轮轮辐与轮辋合成焊接的专用设备。它具有节能、效率高、变形小、焊接强度高、四段焊缝一次成型等一系列优点。
the 4 torch combined welder machine is an inner ring carbon dioxide gas protection automatic welding machine, it can weld wheel disc and rim automatically. it has a series of advantages such as energy saving, high efficiency, small deformation, high welding strength.
设备型号
model number
hchj-4x350-ah
电网电压
working voltage
380v±10%, 3phase, 50hz
转台转速(无级可调)
adjustable range of turntable speed
0.1 rpm ~ 2 rpm
电机扭矩
motor torque
3.8n.m
压缩空气
compressed air pressure
0.4~0.6mpa
轴向调整量
axial adjustment of welding torch
100mm
径向调整量
radial adjustment of welding torch
160mm
焊枪弯角
angle range of welding torch
30-45°
焊接电压(无级可调)
adjusting range of welding voltage
0~30v
焊接电流(无级可调)
adjusting range of welding current
0~500a
焊丝直径
welding wire diameter
φ1.2~φ1.6mm
二氧化碳消耗量(根据产品可调)
co₂ consumption
nominal 15l/minx4, can be adjusted in line with rim specs

设备型号	model number	hchj-4x350-ah
电网电压	working voltage	380v±10%, 3phase, 50hz
转台转速(无级可调)	adjustable range of turntable speed	0.1 rpm ~ 2 rpm
电机扭矩	motor torque	3.8n.m
压缩空气	compressed air pressure	0.4~0.6mpa
轴向调整量	axial adjustment of welding torch	100mm
径向调整量	radial adjustment of welding torch	160mm
焊枪弯角	angle range of welding torch	30-45°
焊接电压(无级可调)	adjusting range of welding voltage	0~30v
焊接电流(无级可调)	adjusting range of welding current	0~500a
焊丝直径	welding wire diameter	φ1.2~φ1.6mm
二氧化碳消耗量(根据产品可调)	co₂ consumption	nominal 15l/minx4, can be adjusted in line with rim specs