闪光对焊机-欧洲杯在线买球平台

本闪光对焊机是车轮轮辋焊接的专用设备，其工件的夹紧、焊接均为液压驱动，焊接参数可由触摸屏设定，具有自动化程度高、工作可靠、调整方便等特点。该机由主机、电气系统、液压系统三部分组成。

the model of welder is the dedicated equipment for welding rim and disc. its clamping and upsetting drive by hydraulic system, the welding parameters can be set from touch screen, and it features a high degree of automation, reliable operation, easy adjustable, etc. the welder is made of host, electrical system and hydraulic system.

技术特色

闪光对焊机是车轮轮辋焊接的专用设备，焊接参数由触摸屏设定，自动化程度高、工作可靠、调整方便等特点。有效解决了高强板焊接牢固及焊口强度。

智能化：由伺服阀控制频闪烧化的过程，使焊接稳定，响应速度快。针对厚度不同的轮辋，可以选择相应的焊接档位。

发展方向：实现无人化生产，组件自动上下料机构，实现相应配套。

电气系统

electrical system

电气系统包括焊接主电路和控制电路。

electrical system includes welding main circuit and control circuit.

(1)焊接主电路由主开关qs、晶闸管开关kp和变压器tc3等组成。主开关qs用于接通和切断焊接回路供电电源，当调整变压器级数或焊机长期不用时，应断开qs。晶闸管开关在焊机工作时用于接通或关断焊接电源。变压器tc3用于提供不同电压级别的焊接电压，共8级。

welding main circuit is composed of the main switch qs, thyristor switch kp and transformer tc3. the main switch qs is used for switch-on and turn-off the power supply of welding circuit, it shall be turn off if adjust welding transformer series or long time on use. the thyristor switch kp is used for switch-on or turn-off the welding power when welder is running. the transformer tc3 is used for supplying different welding voltage which is total 8 series for this model.

(2)控制电路由plc的输入/输出电路、操作件、触摸屏等组成。plc是控制电路的核心，焊机按plc的程序工作，旋转编码器经齿轮齿条与动板相接，用于检测动板的位移，其精度为35脉冲/mm。plc根据脉冲信号控制动板的变速和换向，触摸屏用于监视焊机工作，并可按要求修改参数。

control circuit is composed of plc input/output circuit, operation element and touch screen etc. the plc is the core of control circuit, and the welder will run according to the programs of plc. the rotary encoder is connected with movable plate through pinion and rack which is used to detect displacement of movable plate, with accuracy of 35pulse/mm. plc will control the speed and reversing of movable plate according to the pulse signal. touch screen is used to monitor welding operation, amend parameter in line with welding requirements.

液压系统

hydraulic system

液压系统由液压站、管路和主机上的油缸、阀等组成。液压站用于提供系统压力。主机上的阀组用于控制各油缸的工作，其中顶锻压力、夹紧压力、预热压力均可单独调节，并有压力表显示调节值，在顶锻油缸装有一杠杆调节阀，用于调节动板向前时的速度。

、the hydraulic system is composed of hydraulic station, piping, oil cylinder and valve of host. hydraulic station supplies the system pressure. the valves of host control the oil cylinders. the upsetting pressure, clamping pressure and pre-heating pressure can be adjusted separately which display the adjustment value by pressure gauge. and the upsetting oil cylinder is equipped with a lever regulating valve which is used for adjusting the forward speed of movable plate.

技术数据

specification

设备型号	model number	unb3-600-a
主电路额定输入电压 单相	rated input voltage of main power circuit	ac 400~430v, 50hz, single phas
控制电路额定输入电压 三相	rated input voltage of control power circui	ac 380v, 50hz, 3phas
主电路输出电压	output voltage of main power circuit	8.8v～14.6v
电磁阀电压(直流)	voltage of solenoid valve	dc 24v
总输入功率(千伏安)	total input power	630kva
最大顶锻力	maximum upsetting force	200kn
最大夹紧力	maximum clamping force	550kn
最大焊接截面积	maximum welding section area	2800mm2
最大板宽	maximum width of rim band	320mm
最大板厚	maximum thickness of steel strip	4.5mm (up to 5.0mm)
最小焊接钢圈直径	minimum diameter of rim band	250mm
冷水机注水量	filling volume of cooling water machine	1300l
冷却水温度	temperature of cooling water	≤ 25℃